
New TopShim run:

version = topshim 2.4.0
date = 2024-05-16
time = 12:39:46.963
command = topshim 

FINE SHIMMING

Parameters:

probe = Z113652_0298
solvent = DMSO
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 2.49 ppm

Results:


1D Shimming:
Iteration  1: FWHM Before= 0.5 Hz, Target= 0.7 Hz, After= 1.8 Hz
Iteration  2: FWHM Before= 1.8 Hz, Target= 0.4 Hz, After= 0.7 Hz
Iteration  3: FWHM Before= 0.7 Hz, Target= 0.7 Hz, After= 0.9 Hz
Iteration  4: FWHM Before= 0.9 Hz, Target= 0.5 Hz, After= 0.7 Hz
Iteration  5: FWHM Before= 0.7 Hz, Target= 0.7 Hz, After= 0.7 Hz
Iteration  6: FWHM Before= 0.7 Hz, Target= 0.3 Hz, After= 0.6 Hz
Iteration  7: FWHM Before= 0.6 Hz, Target= 0.5 Hz, After= 1.0 Hz
Diverging behaviour detected. Shimming was aborted.
Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 0.919

shim changes: 
Z	-242
Z2	+101
Z3	-182
Z4	+375
Z5	+326
Z6	+536
Z7	-11149
Z8	+13262

duration = 1 min 51 sec
completed successfully
finished Thu May 16 12:41:36 2024


========================================================================
